Eurolite Set LED KLS Laser Bar FX Light Set white + BPS-3 Loudspeaker Stand white

10B04D49

10.509,00NOK

Prisen er inkl. 25% mva

Leveringstid: 6 til 10 dager.

Compact lightweight
Crossbar with integrated DMX control unit and stand sleeve
2 laser diodes project hundreds of red and green laser beams
Two rotating derbies for mirror ball effects with three bright LEDs (red, green and blue) each
For application areas such as: Wedding/gala/events; mobile use; Clubs/dancing school; Party room; mobile djs/entertainer
When fog is used, this effect becomes especially attractive
37 integrated show programs
Control via Wireless footswitch; IR remote control; DMX; Master/slave function; Sound to light via Microphone; W-DMX by wireless solution via USB (optional); QuickDMX via USB (optional); CRMX by LumenRadio via USB (optional); stand-alone
With Mounting bracket
Preprogrammed in Light´J; EASY SHOW 1; LED PC-Control 512; Light Captain
Mains input and output for power linking up to 8 units
Application possibility: On tripod
Laser class 2M does not require additional protective measures or appointment of a laser safety officer
3 powerful LEDs 3 W high-power 3in1 TCL RGB (homogenous color mix) spots controlled separately
3 powerful LEDs 1 W high-power R/G/B
Flower effect; multi beam effect
4 powerful LEDs 1 W high-power cold white (CW)
Strobe effect
1 x device, 1 x user manual, 1 x power cord, 1 x declaration of conformity, 1 x foot control, 1 x remote control, 2 x battery, 2 x mounting bracket, 1 x bag, 2 x knurled screw, 2 x washer
Rugged, square base plate (55 x 55 cm)
3 x M20 thread for off-center installation
Reinforcing sleeves for an optimal base-to-pole connection
35 mm extension tube with M10 thread for light fixtures

Weight:	25,45 kg
EUROLITE LED KLS Laser Bar FX Light Set wh
Power supply:	100-240 V AC, 50/60 Hz
Power consumption:	50 W
IP classification:	IP20
Protection class:	Protection class I
Power connection:	Mains input via IEC connector (M) mounting version power supply cord with safety plug (provided)
Power output:	1 x IEC connector (F) mounting version
Fuse:	5 x 20 mm, F 1 A Fuse replaceable
Lamp type:	LED lamp
Flash rate:	0 - 30 Hz
DMX channels:	3; 5; 9; 19; 27
DMX input:	1 x 3-pin XLR (M) mounting version
DMX output:	1 x 3-pin XLR (F) mounting version
Cooling:	Cooling fan
Control:	Wireless footswitch; IR remote control; DMX; Master/slave function; Sound to light via Microphone; W-DMX by wireless solution via USB (optional); QuickDMX via USB (optional); CRMX by LumenRadio via USB (optional); stand-alone
Preprogrammed in:	Light´J; EASY SHOW 1; LED PC-Control 512; Light Captain
Housing color:	White
Attachment system:	2x Mounting bracket
Dimensions:	Width: 1,03 m Depth: 6,1 cm Height: 38,7 cm
Weight:	9,05 kg
Noise classification:	Class 2 (slight noise)
Laser
Laser class:	2M
Laser color:	R/G
Laser module:	Red (R) 100 mW 650nm Green (G) 30 mW 532nm
Spotlight
LED:	3 x 3 W high-power 3in1 TCL RGB (homogenous color mix)
Light effect
LED:	3 x 1 W high-power R/G/B
Bar
LED:	4 x 1 W high-power cold white (CW)
Foot control
Battery:	1 x 9.0 V E block 6LR61 alkaline manganese included
Remote control
Battery:	1 x Button cell 3.0 V CR2025 lithium manganese built-in
OMNITRONIC BPS-3 Loudspeaker Stand white
Weight:	13,61 kg