The BT-4 series is a range of high powered LED pars built into a slimline ABS housing so it can fit in the tightest of spaces like box truss. These fixtures are equipped with a power-connector
in/out for daisy chaining multiple units together. All BT4 models have pre-set programs that can be used in stand-alone mode. In the DMX settings there is the choice of different DMX modes with
pre-set colour macro's or a mode where you can control every single colour individually per section. The same can be done in stand-alone mode with the supplied remote control. The robust ABS housing
and double stand also make the BT Pars ideal for rental as they are lightweight and easy to setup. Ideal for DJs, bands, stages and venues wanting a great colour wash.
60x 3W 3-in-1 LEDs
Group controllable LEDs
RGB Colour mixing
Colour Temp. 2700 - 8000K
CTB and CTO Colour
Lightweight ABS housing
11 or 29 DMX channels
Built-in programs
DMX and Stand-alone mode
Master/slave function
0-100% Dimmer
Sound controlled
Auto mode
DMX in/output via 3-pin XLR
Control panel with LED display
Power-connector input/output
IR remote control
Double bracket also acts as floor stand
Supplied features
Master/Slave mode
Light source
3-in-1 LED
LED colours
Red, Green, Blue
LED power
3
Colour temperature
2700K - 8000K
Quantity of LEDs
60
Beam angle
26°
Field angle
44°
Illuminance
16553 lx @ 1m
DMX channels
11, 29
DMX connector
3-pin XLR
Modes
Automatic programs, DMX, Master/Slave
IP rating
IP20
Cooling
Fan
Display
LED
Power plug
Power-connector
Power consumption
1.6 - 0.78A
Power supply
100-240VAC 50/60Hz
Dimensions (L x W x H)
220 x 270 x 115mm
Weight
2,50
Accessories
DMX cable, Mounting bracket, Power cable, Remote control, Safety cord
pdf
