The Pollux is a DMX Super animation laser with over hundred incorporated effects on the enclosed SD card. The Pollux 1200 TTL features a TTL (transistor-transistor-logic) modulation. This basically allows you can create 7 colours at their full intensity thanks to the RGB mixing capabilities. On the back you will find a DMX in/output with 3-pin XLR and an ILDA in/out connection. An ILDA connector is the standard connector for show laser lights that connect the laser display with an ILDA cable to the laser control device. When using a DMX controller the Pollux laser offers 17 DMX channels in DMX mode. It’s also possible to set the Pollux 1200 TTL into a sound-activated mode with the built-in microphone on the back of the laser. Including a 2GB SD card and remote control. - Powerful 1,2W TTL animation laser
- Red (350mW), Green (150mW) and Blue (700mW) laser modules
- 15K high speed optical scanner system
- DMX and Stand-alone mode
- 17 DMX channels
- Master/slave function
- Sound activated with adjustable sensitivity
- Auto mode
- Preprogrammed patterns and animations
- DMX in/output via 3-pin XLR
- ILDA in/output
- Control panel with LCD display
- Incl. 2GB SD Card and remote control
| Product colour | Black | | Input connections | SD | | DMX channels | 17 | | DMX connection | 3-pin XLR | | ILDA | DB25 | | Laser Red | 350mW @ 650nm | | Laser Green | 150mW @ 532nm | | Laser Blue | 700mW @ 445nm | | Scanner system | 15kpps @ 8° | | Guaranteed output (99mW) | 1000mW | | Maximum output (99mW) | 1200mW | | Power consumption | 0.4 - 0.2A | | Power supply | 100-240VAC 50/60Hz | | Dimensions (L x W x H) | 215 x 215 x 191 mm | | Weight (kg) | 2,50 |
 pdf
   
   
   
  | 
