SHOWBAR with PAR, Butterfly, Laser and Strobe effects

The ultimate SHOWBAR kit contains 6 effects mounted on a DMX T-bar. The SHOWBAR is a pair of LED butterfly effect lights, a pair of LED pars, a powerful green and red laser and a strobe effect. The T-bar contains 4 built-in 1W high power white LEDs to create an amazing strobe effect. The T-bar can be controlled in a 2-channel easy DMX setting, 9 and 18 or 30-channel fully customizable setup. The T-bar is also equipped with an IR sensor for controlling on distance by remote control. You can also use the wireless foot-controller to simply swap between auto mode or sound activated mode. Link multiple units together with IEC-connector and DMX. The SHOWBAR can be mounted on a 38mm stand or you can use the mounting brackets on both sides to mount it to the ceiling.

• 2x PAR Cans with each 6x 8W LED 4-in-1 RGB-UV
• 2x Butterfly with each 4x 3W RGBW
• 4x 1W White strobe effect
• Laser Red/Green 70/100mW
• DMX and stand-alone mode
• 2, 9, 18 or 30 DMX channels
• Master/slave synchronization
• Sound activated with adjustable sensitivity
• Auto mode with adjustable speed
• Pre programmed shows
• DMX in-/output via 3-pin XLR
• IEC-connector in-/output
• Control panel with LED display
• Wireless footcontrol
• IR-Remote control
• Complete with bag
• Supplied without stand (180.620)

pdf