www.discoworld.no - webshop
  Forside » Mikrofoner » Kondensator Mikrofoner » 10A03F37 Kunde logg inn | Handlekurv | Kasse  
Kategorier
Produsenter
Nyheter Mer
Ernie Ball EB-6056 Patch Cable, High quaility patch cables 45 cm, w
Ernie Ball EB-6056 Patch Cable, High quaility patch cables 45 cm, w
239,00NOK
Informasjon

 » Hvem er vi

 » Salgsbetingelser

 » Kontakt oss

Lewitt Authentica LCT-940 Studie mikrofon
Trykk for større bilde


design/printicon.gif
Print

Lewitt Authentica LCT-940 Studie mikrofon

10A03F37 | LCT940


16.809,00NOK

Prisen er inkl. 25% mva


Leveringstid: 6 til 10 dager.

Lewitt Authentica LCT-940 Studie mikrofon

LCT940 forener de specifikke karakteristika fra en stor diafragme FET kondensatormikrofon og en sublim rørmikrofon. Den tilbyder hele ni forskellige polar-mønstre – fem "standard" polar-mønstre omnidirektionelle, nyre, figure-8, bred- og supernyre og fire ekstra mønstre. LCT940 tilbyder også Automatisk dæmpning, Clipping-History, fire fordæmpninger og low-cut filtre.

  • Type: Condenser, externally polarized
  • Acoustical operating principle: Pressure gradient transducer
  • Transducer Ø: 25.4 mm, 1 in
  • Polar pattern: Omnidirectional , broad cardioid, cardioid, supercardioid, figure-8 and four intermediate patterns
  • Frequency range: 20 ... 20,000 Hz
  • Sensitivity: 23 mV/Pa, -33 dBV/Pa (cardioid), 20 mV/Pa, -34 dBV/Pa (omni), 23 mV/Pa, -33 dBV/Pa (figure-8)
  • Equivalent noise level (FET): 8 dB (A), cardioid, 9 dB (A), omni, 8 dB (A), figure-8
  • Equivalent noise level (Tube): 12 dB (A), cardioid, 13 dB (A), omni, 12 dB (A), figure-8
  • Max. SPL for 0.5 % THD (FET): 143 dBSPL, 0 dB pre-attenuation
  • Max. SPL for 0.5% THD (Tube): 140 dBSPL, 0 dB pre-attenuation
  • Signal / noise ratio (FET): 86 dB (A)
  • Signal / noise ratio (Tube): 82 dB (A)
  • Dynamic range of FET mic. Amp.: 135 dB (A)
  • Dynamic range of Tube mic. Amp.: 128 dB (A)
  • Pre-attenuation pad: 0 dB, -6 dB, -12 dB, -18 dB
  • Low-cut filter: linear 40 Hz (12 dB/oct), 150 Hz (6 dB/oct), 300 Hz (6 dB/oct)
  • Internal impedance: 200 Ω
  • Rated load impedance: 1,000 Ω
  • PSU - supply voltage: 230 V, 50 Hz, 110 V, 60 Hz
  • Current consumption: 170 mA
  • Connector: Gold plated 11-pin XLR
  • Microphone dimensions: 192 x 60 x 46 mm, 7.5 x 2.4 x 1.8 in
  • PSU dimensions: 250 x 150 x 70 mm, 9.8 x 5.9 x 2.8 in
  • Microphone net weight: 662 g, 23.3 oz
  • PSU net weight: 1930 g, 68.1 oz


Handlevogn Mer
0 items: 0,00NOK
Shipping: 0,00NOK
Tilbud Mer
König Satellitt Mast 2 m - Diameter 42 mm, SAT-SMS42-2
König Satellitt Mast 2 m - Diameter 42 mm, SAT-SMS42-2
369,00NOK
329,00NOK
Tilbud Mer
Hi-Fi basenhed med polymembran / 8" bas 100W rms 8 ohm
Hi-Fi basenhed med polymembran / 8" bas 100W rms 8 ohm
700,00NOK
423,00NOK
Språk
Norsk English
Valuta

Copyright © 2019 DiscoWorld

BankAxept Visa Eurocard Visa Electron JCB