Lewitt DGT450 USB mikrofon

Lewitt DGT450 USB mikrofon

LEWITT DGT450 er en professionel USB-optagelsesløsning til PC, MAC og iOS-enheder. 24 bit / 96 kHz, 93 dB dynamisk vidde, præ-dæmpning og low-cut filter er fundamentet i optagelserne. Den tilbyder asynkron USB-overførsel, understøttelse af OS X Core Audio og ASIO til Windows og muligheden for at cross-fade mellem zero-latency direct og tape-return monitoring. DGT450 er det ideelle alt-i-en udstyr til optagelse af vokal, instrumenter og live-optrædener. Den fungerer direkte med f.eks. iPhone, iPad eller iPod.

• Type: Condenser, permanently polarized
• Acoustical operating principle: Pressure gradient transducer
• Transducer Ø: 17 mm, 0.67 in
• Polar pattern: Cardioid
• Frequency range: 50 ... 20,000 Hz
• Dynamic range: 93 dB (A)
• Pre-attenuation pad: 0 dB, -10 dB
• Low-cut filter: linear 80 Hz (12 dB/oct)
• Front to back ratio at 1kHz: ≥ 15 dB (A)
• Sensitivity at 1 kHz: - 24 dBFS
• Analog gain range: 0 ... 44 dB
• Equivalent noise level: 25 dB (A)
• Max. SPL for 0.5 % THD: 118 dBSPL, 0 dB pre-attenuation
• Resolution: 24 Bit
• Sample rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
• Recording modes: Cardioid/Cardioid + Line-in
• Supply voltage (DGT): on iOS additional 5V/500mA, micro-USB power supply required
• Connector: USB to 18-pin lockable hi-speed connector
• Input impedance: > 1 Meg Ω
• Full scale input voltage (0 dB gain): 0.7 VRMS, -0.9 dBu (re 0.775 VRMS)
• Input dynamic range: ≥ 96 dB (A)
• Frequency response: 20 ... 20,000 Hz
• Operating principle: Mono line input
• Analog gain range: 0 ... 12 dB
• Headphone output power: 20 mW at 16 Ω, THD+N < 0,5%, 16 mW at 32 Ω, THD+N < 0,5%
• Frequency response: 20 ... 20,000 Hz
• Headphone volume control: - 60 dB ... 0 dB