Audio transformer 1:1 for microphone signals, from NEUTRIK. When installing unshielded transformers into units with interference fields (e.g. power transformers), attention has to be paid to respective shielding measures. - Very compact design, e.g. also suitable for the installation into connector housings
- Unshielded version with bare wire connections (70 mm)
- Wideband version
- Balance adjustment
- Galvanic isolation to avoid/eliminate hum loops
- Max. input voltage: 550 mV (1 % THD/50 Hz)
| Type | transformer | | Frequency range | 20-20,000 Hz | | Control range | - | | Control frequencies | - | | Input signal | 50 mV | | Input sensitivity | - | | Input impedance | 200 Ω | | Output signal | - | | Output impedance | 2 kΩ | | Gain | - | | Phantom power | - | | Compression | - | | Gate ratio | - | | Crossover frequency | - | | High-pass filter | - | | Low cut | - | | Transmission ratio | 1:1 | | S/N ratio | - | | Channel separation | - | | THD | - | | Admiss. ambient temp. | - | | Power supply | - | | Dimensions | 14 x 11 x 12 mm (w/o cable) | | Weight | 4 g | | Inputs | - | | Outputs | - | | Other features | - |
  | 
